| |
|
|
 |
Plant Capacity
We have 35,000 Sq. Ft. of work area under roof and 150,000 Sq. Ft.
of yard area.
| |
Main Work Bays |
|
| |
60' x 325' |
19,500 Sq. Ft. |
| |
60' x 150' |
9,000 Sq. Ft. |
| |
Total Shop Area |
28,500 Sq. Ft. |
| |
|
|
| |
Offices |
|
| |
Floor Space |
6,500 Sq. Ft. |
| |
Total Work Area |
35,000 Sq. Ft. |
| |
|
|
|
|
|
Fabrication
Capabilities
|
Machine Tools
(In-House/Sub-Contract) |
|
Vertical Boring Mills |
Under Tool |
Swing |
| Bullard |
44" |
63Ό" |
| King |
38" |
46" |
| Bullard |
48" |
68" |
| (Contract) |
(80") |
(144") |
| |
|
|
|
Drilling |
|
|
| Radial Arm |
Three: 6 ft. ARM |
|
| |
Two: 8 ft. ARM |
|
| |
3" Diameter Hole Maximum & 10"
Depth |
| |
|
|
| Numeric Control |
One: G & L Model 10VS |
| |
Four: G & L Model 15 VS |
| |
|
|
|
Horizontal Boring Mills |
|
| |
Spindle |
|
| (Sub-contract) |
(6") |
|
| |
|
|
|
Machine tools readily available on contract in
immediate vicinity.Automatic Tube Expansion Equipment by roller expansion
(other methods available on sub-contract basis.) |
| |
|
 |
Materials
The following materials are
used in fabrication and numerous current code-welding
procedures are qualified in each: |
| Carbon Steel |
P-1 |
| Low Alloy Steel |
P-2,3,4,5 |
| High Chrome Alloy |
P-6,7 |
| Stainless Alloy |
P-8,9 |
| Duplex (2205) |
P-10H |
| Nickel Alloy |
P-42,45 |
| Overlay (Wire, Stick, Strip) |
P-7,8,42,45 |
| |
|
|
| |
|
|
Welding
The following welding
methods are used with the listed welding equipment: |
| SMAW |
500 AMP rating |
| SAW |
1000 Amp rating |
| GTAW |
500 Amp high frequency
rating |
| GMAW |
500 Amp rating
(non-pressure only) |
| Strip Overlay |
1 unit of 30/60 mm with 1500 Amp
rating |
| |
|
|
| |
|
|
Qualified Welders
Welders are qualified
according to ASME Code Sect. IX for the following methods: |
| Stick Electrode |
|
| Sub Arc |
|
| GMAW (MIG) |
(Not utilized in CODE welding) |
| GTAW (TIG) |
|
| |
|
|
Tube to tubesheet welding by manual GTAW (TIG)
on all materials listed above is provided by HTE.
Machine welding of titanium and special requirements
is sub-contracted (References on two sub-contractors
available on request). |
| |
|
|
Thermal Cutting
The thermal cutting
equipment available includes: |
| Oxygen-Acetylene: |
4½" Maximum Thickness |
| Plasma Cutting: |
1½" Maximum |
| |
|
| |
|
|
Miscellaneous Capabilities
- Four (4) 10-ton overhead cranes, one
(1) 15-ton overhead crane and one (1) 25-ton overhead
crane are operated over two fabrication bays. The hook
height (under hook) is 24'.
- Heat-treating is sub-contracted.
Accommodations include 100' length, 10' width, and 13'
height. Heat controls are automatic.
- Painting and preparation for painting
is sub-contracted. Specialty exterior and internal
coatings are available.
- Local post weld heat-treating is
sub-contracted.
- Floats, flatbed trucks, and "Hot Shot"
trucks are utilized for transportation on a contract
basis.
|
| |
|
|
|
|
|
|
|
| |
|
|
